Thyristor Module Scr

Thyristor Module Scr 

Input type:

Thermocouple: S B -WRe3-WRe25  WRe5-WRe26 (resolution 0.01^o

Resistance temperature detector: Cu50, Pt100, rF50resolution 0.01 resolution for PT100 from -10 to +100  is 0.001^o

• Linear voltage: -5-55mV (resolution 1V );accuracy 0.05%

• Linear voltage: 0-5V, 0-10V, 0-200V, 0~500V; accuracy 0.03%

• Linear current (I4 module on MIO): 0-20mA,- 40mA

• Linear resistance : 0-360ohm(resolution 0.001); accuracy 0.03%

Instrument Input range

mV (-5-55mV) S(-50+1760)K(-270+1370)E(-270+100J(-210 +1200) T(-270+400)R(-50+1760) B(40+1820^o N(-270 +1300) Pt100(-200+850)Cu50(-50-+150 )F(0-300K) WRe3-WRe25(0+2310) -WRe5-WRe26(0+231)

Measurement accuracy :

Thermocouple accuracy up to 0.05%FS

mV (-555mV)  S(0+1760) K(-150+1370E(-150-1000(-150-1200

T(-150+400)R(0+1760)-B(300 1820 N(-150 +1300 - Pt100(-200+850) Cu50(-50+150 F(0=300K) Wre3-Wre25(0+2310) WRe5-WRe26(0+2310)

Resistance temperature detector accuracy up to 0.03%FS Pt100(-200+850) Cu50(-50+150 F(0-300K)

Sampling Cycle : 0.2sec once^o When digital filter FILt=0response time 0.5sec

Temperature drift :^o0.01%FS / (typical value is 50ppm/)

Control mode:

• AI PID with auto tuning, adopting fuzzy logic PID algorithm.

• Output mode (modularized)

• Relay output (NO+NC): 250VAC/2A or 30VDC/1A

• TRIAC no contact discrete output (NO or NC): 100-240VAC/0.2A (continuous), 2A (20mS

• instantaneous, repeat period^o5s)

• SSR Voltage output: 12VDC/30mA (used to drive SSR).

• Model: AIJK3,AIK62, JK3,JK62